Insect pest susceptibility of grains and seeds recently introduced to the Italian market: An experimental evaluation

To assess the susceptibility of pseudocereals (amaranth and quinoa), minor cereals (teff and millet), and oilseeds (chia and hemp), now commercially available on the European market, to attacks by polyphagous and cosmopolitan insect pests, laboratory tests were set up. Tests involving controlled infestation of seeds, using laboratory-bred insects (Tenebrio molitor, Tribolium confusum, Oryzaephilus surinamensis, Cryptolestes pusillus and Plodia interpunctella), were carried out in a climatic chamber at 23 ± 2 °C and 65 ± 5% R.H.. Development time, the number of adults and the weight of these adults were evaluated. The results show that each considered foodstuff has a different susceptibility to infestation and differences both in the number of adults emerged and in their weight compared to control. Millet was the only product that allowed larval development up to the adult stage for all the species examined. No species developed on amaranth. T. confusum and O. surinamensis reached the adult stage on the greatest number of products, 5 and 4 respectively; C. pusillus and T. molitor completed their life cycles on only two commodities: millet and teff, while P. interpunctella only on millet and hemp seeds. Considering the impact of the different pests on the studied grains, T. confusum was the only species able to develop on all the grains, but the number of emerged adults was lower than on the standard diet. These results show that, even if these commodities are new in the European market, they are susceptible to the infestation of common stored product pests that could led to a removal from the market of a contaminated stock, so a continuous monitoring is needed.     

淀粉/聚乙烯醇活性包装薄膜及其在食品包装应用中的研究进展

综述了淀粉/聚乙烯醇（PVA）活性包装薄膜及其在食品包装中的研究进展，主要对从不同比例共混、疏水改性、增强改性等方面对淀粉/PVA薄膜的改性研究，从功能特性和活性物质对薄膜性能的影响2个方面对淀粉/PVA活性薄膜研究和薄膜在食品包装中的应用3个方面进行了归纳总结，旨在为以淀粉/PVA为基材的活性包装薄膜研究提供参考。     

Physicochemical and tribological properties of microalgae oil as biolubricant for hydrogen-powered engine

Hydrogen fuel offers a cleaner fuel alternative to fossil fuel due to more efficient burning as well as reduces the environmental and health issues brought by fossil fuel usage. In engine application, regardless of either pure hydrogen or in combination with air or/and other biofuel, all the moving parts are exposed to friction and wear, and lubricant is used to minimize friction and wear for optimum operation. Thus, in this study, the use of microalgae oil as an alternative biolubricant is evaluated from the physicochemical and tribological aspects. It is found that modified microalgae oil (MMO) has demonstrated great anti-friction and anti-wear potential, particularly the 10% modified microalgae oil blend (MMO-10). The coefficient of friction is reduced (up to 10.1%) and significant reductions of wear loss and surface roughness are obtained in comparison to pure poly-alpha-olefin. Lubricant's heat dissipation is also enhanced with MMO addition, demonstrating great prospect for MMO for hydrogen-powered engine utilization.     

Sintering Mechanism and Microstructure of TaC/SiC Composites Consolidated by plasma-activated sintering

TaC/SiC composites with 5 wt% SiC addition were densified by plasma-activated sintering (PAS) at 1500–1800 °C for 5 min under 30 MPa. The effects of plasma-activated sintering on microstructures, densification and mechanical properties of the composites were investigated. The results showed that TaC/SiC composites achieved a relative density more than 99% of the theoretical density at 1600 °C. A low eutectic liquid phase generated by the oxide on the particle surface was observed in the composite to realize a relatively low temperature sintering densification. While the TaC particle size decreased insignificantly with increasing sintering temperature, the transformation of morphology of SiC particles changing from equiaxed to elongated grain was activated, accompanying with a slight particle size decreasing of the SiC phase, thus promoting a relatively high flexural strength of 550 MPa under 1800 °C. Besides, some ultra-fine 2 nm Ta₂Si was observed in the glassy pockets, strengthening the amorphous phase and thus increasing the flexural strength.     

Compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing

Frontiers of Mechanical Engineering - Lattice structures have numerous outstanding characteristics, such as light weight, high strength, excellent shock resistance, and highly efficient heat...     

新工科背景下食品类专业人才创新实践能力培养模式的构建与实践

食品类专业人才的创新实践能力培养是食品产业的行业需求,该行业仍存在产业规模巨大而创造能力不足的矛盾问题。文章立足于新工科时代背景,结合高校食品学院在教学中存在的问题,从课程体系、资源整合、师资配置3个方面探究食品类专业人才创新实践能力培养模式的构建与实践,以期为增强食品类人才的创新能力和实践能力提供改革思路。     

具有吸附作用的酸液缓速外加剂FL-1的研制

针对目前常规酸液缓速外加剂普遍存在泵入地层困难,二次伤害大等问题,从分子结构出发,合成了一种具有吸附作用的酸液缓速外加剂。采用CO2气体采集装置对外加剂延缓酸岩反应性能和缓速酸液的黏度进行了评价。结果表明,外加剂质量分数为0.5%时,缓速时间为140 min,酸液初始黏度为4.5 m Pa·s;酸岩反应过程中随着盐质量浓度和转子转速的逐渐增大,酸液缓速外加剂仍具有较好的缓速效果,并且外加剂与其他处理剂配伍性良好。     

Performance improvement of conventional and inverted polymer solar cells with hydrophobic fluoropolymer as nonvolatile processing additive

The morphology of the photoactive layer critically affects the performance of the bulk heterojunction polymer solar cells (PSCs). To control the morphology, we introduced a hydrophobic fluoropolymer polyvinylidene fluoride (PVDF) as nonvolatile additive into the P3HT:PCBM active layer. The effect of PVDF on the surface and the bulk morphology were investigated by atomic force microscope and transmission electron microscopy, respectively. Through the repulsive interactions between the hydrophilic PCBM and the hydrophobic PVDF, much more uniform phase separation with good P3HT crystallinity is formed within the active layer, resulting enhanced light harvesting and improved photovoltaic performance in conventional devices. The PCE of the conventional device can improve from 2.40% to 3.07% with PVDF additive. The PVDF distribution within the active layer was investigated by secondary ion mass spectroscopy, confirming a bottom distribution of PVDF. Therefore, inverted device structure was designed, and the PCE can improve from 2.81% to 3.45% with PVDF additive. Our findings suggest that PVDF is a promising nonvolatile processing additive for high performance polymer solar cells.     

食物成瘾的研究进展及启示

食物成瘾是一种复杂的慢性疾病，导致人们在日常生活中对某种食物产生过度依赖与过度进食等相关行为特征，近年来已被认为是影响欧美发达国家肥胖症、暴食症、糖尿病等发病率持续升高的关键原因，引起学术界的极大关注，成为研究热点。本文主要介绍食物成瘾的概念、诊断标准，综述了食物成瘾的病理机制、影响因素和应对措施等方面的研究进展，并探讨食物成瘾对我国食品界的启示，为预防食物成瘾，保障公众健康提供有益借鉴。